Testers & Trackers

Multipurpose LCD Cable Tester & Tracker

NF-838

Features:

  • Troubleshooting for CAT 5 and 6, telephone, coaxial, USB, 1394 cables and other wires

  • 5 kinds of cable can be trace located : RJ45/RJ11/BNC/USB/1394

  • 9 different tones for different circuit status

  • LCD light assists use in dark corners. 

  • Earphones included for operation in noisy environments

 Transmitter specifications:

  • Indicator LCD: 53x25 mm, with back light

  • Max. distance of transmission: 2 km

  • Max. working current: Less than 70mA

  • Tone mode: 9 Tone adjustable

  • Compatible connectors: RJ45(8pin),RJ11(2pin), BNC, USB, IEEE1394

  • Max. signal voltage: 15Vp-p

  • Function and faults LCD display: LCD display (wiremap, tone, short, no adapter, low  battery)

  • Cable map indication: LCD (#1-#8)

  • Shielded indication: LCD ( #9)

  • Voltage protection: AC 60V/DC 42V

  • Battery Type: DC9.0V(NEDA 1604/6F22 DC9V x 1pcs)

  • Dimension: (LxWxD) 185x80x32mm

 Receiver specifications:

  • Frequency: 455kHz

  • Max. working current: Less than 70mA

  • Earjack: 1

  • LED illumination: 2

  • Battery Type: DC9.0V(NEDA 1604/6F22 DC9V) x1pc

  • Dimension (LxWxD): 218x46x29 mm

 Remote unit specifications:

  •  Compatible connectors: RJ45(8pin),RJ11(2pin),BNC,USB,139

  •  Dimension (LxWxD): 107x30x24mm

Accesories included:

  • Earphones

  • RJ11 Adapter Line

  • Alligator Clip AdapterLine

  • Sling Carrying Pouch

  • User Manual

Wire Fault Locator

NF-308

Features:

  • Directly hunt 5E, 6E, telephone wire, coaxial cable, USB cable and other cables.

  • Check wiring error in 5E, 6E, coaxial cable eg. open circuit,short circuit, jumper wire, reverse connection

  • Locate wiring or connection error

  • Measures cable length up to 1000m and locate breakage point

  • Polarity test function measure DC voltage (0.5-60V) 

  • Memory and storage for calibration data

  • Automatic time-delay shut off 

  • Low battery alarm function

 Transmitter specifications:
 

  • Indicator: LCD 53x25 mm, with backlight

  • Tone frequency: 225kHz

  • Max. distance of transmission: 2 km

  • Max. distance of cable map: 1 km

  • Max. working current: Less than 70mA

  • Tone mode: 2 Tones adjustable

  • Compatible connectors: RJ11, RJ45, BNC, USB

  • Max. signal voltage: 15Vp-p

  • Function selection: 3 position buttons & 1 power switch

  • Function and faults LCD display: LCD display (wiremap, tone, short, , no adapter, low  battery)

  • Cable map indication: LCD (#1-#8)

  • Shielded indication: LCD ( #9)

  • Voltage protection: AC 60V/DC 42V

  • Battery Type: DC9.0V(NEDA 1604/6F22 DC9V x 1pcs) 

  • Dimension(LxWxD): 185x80x32mm

 Receiver specifications:
 

  • Frequency: 225kHz

  • Max. working current: Less than 70mA

  • Earjack: 1

  • LED illumination: 2

  • Battery Type: DC9.0V(NEDA 1604/6F22 DC9V) x1pc

  • Dimension(LxWxD): 218x46x29 mm

 Remote unit specifications:
 

  • Compatible connectors: RJ45, BNC

  • Dimension(LxWxD): 107x30x24mm

HDMI Cable Tester

NF-HDMI

Features:

  • Fast and accurate verification with type A - A, A - C and C - C connectors.

  • Check miswires, short, open and cross status of HDMI cables.

  • Mapping continuity and proper configuration.

  • Displays 19 pin-to-pin and shield connection status on both main and remote unit.

  • Adjustable test modes: Fast/slow scan/manual test for step by step.

  • Design with loopback function.

Specifications:

  • Cable versions supported: 1.2v, 1.3v, 1.4v

  • Support test 19 pin to pin wiremap and shielding detection

  • Test mode Fast / slow scan / step by step

  • Test distance: <50 meters

  • Status Display: 19 LEDs and shield LED on both master and remote unit

  • Beeper indication: Yes

  • Low battery indication: 6V

  • Power source: DC 9V (NEAD 1604/ 6F22) x1 (not included)

  • Operating Envrioment: 0 to 40deg C < 80% RH

  • Storage: -10 to 50deg C <70%RH

  • Dimensions: Master unit-103x66x27mm Remote unit-103x35x27mm

Wire Tracker

NF-889

Features:

  • Locate specific cables amongst others 

  • Continuity test for LAN cables.

  • Low voltage alarm function.

  • Earphones included for operation in noisy environments.

  • Built-in LED light for use in dark corners

Transmitter specifications:

 Tone frequency 1000Hz

 Max. distance of transmission 2000m

 Max. working current Less than 10mA

 Volume Regulate Function Audio volume level control

 Tone mode 2 Tones, adjustable

 Compatible connectors RJ45, cable clip with RJ11 connector

 Max. signal voltage 8Vp-p

 LED lights display Wiremap, tone, tracing

 Voltage protection AC 60V/DC 42V

 Battery Type DC9.0V(NEDA 1604/6F22) x 1pc

 Dimensions (LxWxD) 15 x 3.7 x 2cm

 

Receiver specifications:

 Frequency 1000Hz

 The Max. working current Less than 30mA

 Earphone jack 1

 Battery Type DC9.0V(NEDA 1604/6F22) x1pc

 Dimensions (LxWxD) 12.2 x 4.5 x 2.3cm

CCTV Tester

NF-703

Features:

  • 3.5 TFT-LCD, 960 (H)× 240 (V) resolution

  • 3 languages: Chinese, English or Spanish can be slected

  • Video level testing- video signals measured in IRE or Mv

  • Audio input testing and PTZ continuing rotating test.

  • Digital multimeter tests: voltage, current, resistance and capacitance, continuity and diode testing

  • PTZ control- Pan/tilts the P/T unit, zooms in/out the lens, adjusts the focus, aperture and sets and calls the preset position

  • Video displaying- automatically adapts and displays video format of NTSC/PAL

  • Video generating- PAL/NTSC multi-system color bar video generator

Accesories included:

  • DC12V 2A  Power Supply  

  • LAN Cable Test Terminal

  • BNC Cable

  • Audio Cable 

  • Gel Protective Cover 

  • Pendant Rope  

  • Camera Power Cable

  • Meter Probe  

  • User Manual 

  • Sling Carrying Pouch 

Please reload